CARLO GAVAZZI MDI 40 TF - CONFIGURATION SOFTWARE Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 27
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
23
ENGLISH
measurement of a process signal from a transmitter: 0 to 20mA, 4 to
20mA, 0 to 10V, 0 to 5V, 1 to 5V and so on which can correspond to a
pressure, humidity, temperature, etc. In this case the measured signal
managed by the electrical scale (see Lo.E, Hi.E) has a numerical
value which is completely different from the one of the displayed scale
(see Lo, Hi).
Fi.S : activation range of the digital filter. This value is programmable
within the range: 0 < Fi.S < 3999.
The programmable numerical value represents the fluctuation range of
the value which has been measured and displayed by MDI40. In the first
configuration phase this value must be 0 and the right value is to be
entered only after the verification of the possible fluctuation.
Example: the measured instantaneous value varies from 1204 to 1210,
and the value to be entered as Fi.S is 6 (1210 - 1204).
Fi.C : value of the filtering coefficient. Value to be programmed within
the range: 1 < Fi.C < 255.
The higher Fi.C, the higher the filtering of the measured value and the
longer the updating time of the displayed value, the alarm set-points and
the analogue retransmission.
NOTE: for a correct working of the filter, the relative coefficient must
satisfy the following relationship: 1 < Fi.C < (Fi.S x 8) < 255.
Example: in order to display a temperature with a resolution of 0.1°C, set
Lo.E=-20°C Lo=-20.0°C, Hi.E=200°C Hi=200.0°C. In this
case the scaling amplitude will be 10 times wider with an clear fluctuation
of the value displayed in the measuring phase. In order to stabilize the
value it is necessary the parameters Fi.S and Fi.C. The value
fluctuates of 0.5°C max., therefore Fi.S=0.5 and the filtering coefficient
Gross Automation (877) 268-3700 · www.carlogavazzisales.com · [email protected]
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27

Comentarios a estos manuales

Sin comentarios