Mastergenerator ModBus Functions
2005 Carlo Gavazzi Industri A/S. All rights reserved.105
Function Code 05: Set single Output Bit
Register
Address
Register 8 bit
Dec Hex
5376 1500 A1 00=Off Bit
5377 1501 A2 01=On Bit
.. . Bit
5503 157F P8 Bit
12288 3000 0 HI LO Bit
12289 3001 1 HI LO Bit
12290 3002 2 HI LO Bit
12291 3003 3 HI LO Bit
4Hi Lo Bit
Bit
12414 307E 126 HI LO Bit
12415 307F 127 HI LO Bit
12544 3100 0 HI LO Bit
12545 3101 1 HI LO Bit
12546 3102 2 HI LO Bit
12547 3103 3 HI LO Bit
4Hi Lo Bit
Bit
12670 317E 126 HI LO Bit
12671 317F 127 HI LO Bit
49152 C000 0 HI LO Bit
49153 C001 1 HI LO Bit
49154 C002 2 HI LO Bit
49155 C003 3 HI LO Bit
4Hi Lo Bit
Bit
49278 C07E 126 HI LO Bit
49279 C07F 127 HI LO Bit
Function Code 06: Preset Single Register
Register
Address
Register 8 bit Format
Dec Hex
4096 1000 B8..B1 A8..A1 Digital
4097 1001 D C Digital
.. .. Digital
4103 1007 P O Digital
Register
Address
Register 8 bit Format
Dec Hex
12288 3000 B8..B1 A8..A1 Digital
12289 3001 D C Digital
.. .. Digital
12295 3007 P O Digital
Reset Multiplexed counter.
A write of a 1, to any address, will reset the multiplexed counter.
Writing of only 1 register at a time is allowed.
Value : 0 or 1
Write a bit, for statically activation of a Dupline channel.
This command will start the configured function, on that channel, as if a
transmitter on that channel are held activated.
Writing of only 1 register at a time is allowed.
Value : 1 start the function, and keep it activated
Value: 0 Release the function.
Write data for Output on Dupline channels.
Writing 1’s will start the configured function, on that channel, as if a
transmitter were activated on the corresponding channels.
Write data for momentary activation of a Dupline Channel
This command will start the configured function, on that channel, as if a
transmitter on that channel were activated for a short pulse.
Writing of only 1 register at a time is allowed.
Bits set, trigger the corresponfing channels
Bits clear, has no function.
Write a bit, for momentary activation of a Dupline Channel
This command will start the configured function, on that channel, as if a
transmitter on that channel were activated for a short pulse.
Writing of only 1 register at a time is allowed.
Value 1: trigger the function
Value 0: allowed, but has no function.
Write a bit, for set or reset of a Dupline Channel
This command will enforce the channel into On or Off , as if a masterfunction
were activated on the channels.
Writing of only 1 register at a time is allowed.
Value 1: Set
Value 0: Reset
(4 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales