CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE Manual de usuario descargar pdf (Pagina 7)

Mastergenerator ModBus Functions

16384 4000 HI LO A1 Limit 1 Low Setup

16385 4001 HI LO A1 Limit 1 High Setup

16386 4002 HI LO A1 Limit 2 Low Setup

16387 4003 HI LO A1 Limit 2 High Setup

16388 4004 HI LO A2 Limit 1 Low Setup

4008 HI LO A3 Limit 1 Low Setup

16416 4020 HI LO B1 Limit 1 Low Setup

16892

41FC

HI Lo P8 Limit 1 Low Setup

16893

41FD

HI Lo P8 Limit 1 High Setup

16894

41FE

HI Lo P8 Limit 2 Low Setup

16895

41FF

HI Lo P8 Limit 2 High Setup

16896 4200 HI LO A1 on-delay tb Setup

16897 4201 HI LO A1 on-delay Setup

16898 4202 HI LO A1 off-delay tb Setup

16899 4203 HI LO A1 off Delay Setup

16900 4204 HI LO A2 on-delay tb Setup

16904 4208 HI LO A3 on-delay tb Setup

16928 4220 HI LO B1 on-delay tb Setup

17404

43FC

HI Lo P8 on-delay tb Setup

17405

43FD

HI Lo P8 on-delay Setup

17406

43FE

HI Lo P8 off-delay tb Setup

17407

43FF

HI Lo P8 off delay Setup

24576 6000 A1 HI: hour Lo: min On-time1 Setup

24577 6001 A1 hour Min Off-time 1 Setup

24578 6002 A1 xxx Days Day select 1 Setup

24579 6003 A1 xxx xxx Don’t-care Setup

24580 6004 A1 HI: hour Lo: min On-time 2 Setup

24581 6005 A1 hour Min Off-time 2 Setup

24582 6006 A1 xxx Days Day select 2 Setup

24583 6007 A1 xxx xxx Don’t-care Setup

24584 6008 A1 HI: hour Lo: min On-time3 Setup

24585 6009 A1 hour Min Off-time 3 Setup

24586 600A A1 x xx Days Day select 3 Setup

25587 600B A1 x xx x xx Don’t-care Setup

25588 600C A1 HI: hour Lo: min On-time 4 Setup

25589 600D A1 hour Min Off-time 4 Setup

25590 600E A1 x xx Days Day select 4 Setup

25591 600F A1 xxx xxx Don’t-care Setup

25592 6010 B1 HI: hour Lo: min On-time 1 Setup

26620 67FC P8 HI: hour Lo: min On-time 4 Setup

26621 67FD P8 hour Min Off-time 4 Setup

26622 67FE P8 xxx Days Day select 4 Setup

26623 67FF P8 x x x xx x Don’t-care Setup

49408 C100 A1 HI LO Pulse count

49409 C101 A2 HI LO Pulse count

49410 C102 A3 HI LO Pulse count

49411 C103 A4 HI LO Pulse count

49534 C17E P7 HI LO Pulse count

49535 C17F P8 HI LO Pulse count

Read AnaLink channels Set-Point values, as configured or as set by a previous

ModBus write-command.

Legal Values lies in the range from 0 to 255, and must be scaled according to

the type of analink signal.

Responds only, if channel is configured for AnaLink channeltype.

4 Registers per Setup.

Reading of 1 to 32 registers possible

If an attempt is made to read from a start-address and the number of registers

exceeds the allowed register range, no answer will be made, as this is interpreted

as an illegal function

Read Realtime channels Set-up values, as configured or as set by a previous

ModBus write-command.

Read On/Off times and day/holiday setup.

Responds only, if channel is configured for a Realtime channeltype.

16 Registers per Setup.

Reading of 1 to 32 registers possible

If an attempt is made to read from a start-address and the number of registers

exceeds the allowed register range, no answer will be made, as this is interpreted

as an illegal function.

Hour and Minutes in BCD

If Hour –value is read as FFh, then this setting is not active.

Days: MSB: Holiday

LSB: Monday

Read Pulse-counter Latched (Frozen) values

If an attempt is made to read from a start-address and the number of registers

exceeds the allowed register range, no answer will be made, as this is interpreted

as an illegal function.

Countvalue in BCD from 0 to 9999

Reading of 1 to 32 registers possible

Read timer channels Set-up ON and OFF delays, as configured or as set by a

revious ModBus write-command.

the delay-tb, if zero, the delay is counted in seconds. It tb = 1, the delay is

counted in minutes.

Responds only, if channel is configured for Timer channel type.

4 Registers per Setup.

Reading of 1 to 128 registers possible

If an attempt is made to read from a start-address and the number of registers

exceeds the allowed register range, no answer will be made, as this is interpreted

as an illegal function.

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios

CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Software CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE