CARLO GAVAZZI MDI 40 TF - CONFIGURATION SOFTWARE Manual de usuario descargar pdf (Pagina 7)

CARLO GAVAZZI Automation Components. Specifications are subject to change without notice. Illustrations are for example only.

Main specifications

Measured voltages

Direct up to 690V, then through external VT’s

Measured currents

Direct up to 5A then through external CT’s

Inputs

Up to 23 (three on the main module, two for each expansion module).

Each configurable as contact, PT100 (2 or 3 wires) or PTC.

Measured earth leakage current

Through external core balance transformer, alarm set-point from 0.03 to 30A

Relay outputs

Up to 22 (two on the measurement module, two for each expansion module)

DMPU-PS software

To configure the device; monitor the system; download the logged values

Communication protocols

Modbus RTU, Modbus TCP/IP, Profibus

Operating temperature

-25 to +55°C (-13°F to 131°F) (R.H from 0 to 90% non condensing @ 40°C)

Installation category

Cat. III (IEC60664, EN60664)

Approvals

CE, cUL (UL508) [UL up to 600V]

Mounting

DIN-rail

Dimensions

Basic configuration: 90x63.2x90 mm (WxHxD)

Full configuration: 270x63.2x90 mm (WxHxD)

Other intermediate configurations available

DMPU-HMI operator panel

Dimension: 96x48x88 (WxHxD)

Power supply 24VDC ± 20%

Twin RS485 port (1 for programming, 1 for communication)

• Displays the instantaneous variables.

• LED and display alarm warning.

• Four programmable keys.

• Freely configurable pages.

• 2 lines LCD.

DMPU-HMI operator panel

• 7" and 4.3" color touchscreen.

• Displays the instantaneous variables (currents, voltages,

powers energy, etc.), virtual alarms, and inputs status.

• Remote motors control using the virtual inputs.

• 2 TCP/IP ports, 1 RS485 port to connect one or more

DMPUs.

BTM-T4/T7 touchscreen

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

CARLO GAVAZZI MDI 40 TF - CONFIGURATION SOFTWARE Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para No CARLO GAVAZZI MDI 40 TF - CONFIGURATION SOFTWARE